Sharp MX-M700 MX-M550 MX-M620 MX-M700 Operation Manual - Page 54

MISFEED REMOVAL Misfeed in the transport area, fusing area, and exit area CAUTION The fusing unit is hot. Take care in removing paper. (Do not touch the metal parts.) 1 Remove the duplex unit. Grasp the finger hold and gently open the unit. Misfed in the fusing area oTurn roller rotating knob B in the direction of the arrow to remove the misfed paper. Roller rotating knob B CAUTION The fusing unit is hot. Take care in removing paper. (Do not touch any metal parts.) 2 Remove the misfed paper as shown in the illustrations below. Misfed in the transport area Turn roller rotating knob A in the direction of the arrow to remove the misfed paper. Fusing unit open tab If the misfed paper is inside the fusing area, turn down the fusing unit open tab to open the fusing unit and remove the misfed paper. Roller rotating knob A NOTES Do not touch or damage the transfer roller. Transfer roller Do not touch or damage the photoconductive drum. After clearing the Photoconductive drum misfeed, promptly close the duplex unit. Leaving the unit open may adversely affect the photo-sensitive drum and cause poor copy quality. Misfed in the exit area Be careful not to tear the misfed paper during removal. 3 Gently close the duplex unit. After closing, confirm that the misfeed message has been cleared and the normal display appears. 2-24