Toshiba Portege M100 Maintenance Manual - Page 113
ERROR STOP : YES/NO, ERROR STATUS NAME, HALT OPERATION ]], Test end, Continue, Retry
View all Toshiba Portege M100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
3 Tests and Diagnostics 3.2 Executing the Diagnostic Test 5. The following message will appear: ERROR STOP : YES/NO Then, use the left or right arrow keys to move the cursor to the desired option and press Enter. Selecting YES stops the test program when an error is found and displays the operation guide on the right side of the display screen as shown below: ERROR STATUS NAME [[ HALT OPERATION ]] 1: Test end 2: Continue 3: Retry These three selections have the following functions respectively: [1] Terminates the test program and exits to the subtest menu. [2] Continues the test. [3] Restarts the test from the error. Selecting NO keeps the test running even if an error is found. 6. Use the arrow keys to move the cursor to the desired option and press Enter. Table 3-1 in section 3.3 describes the function of each test on the subtest menu. Table 3-2 in section 3.16 describes the error codes and error status for each error. 3-6 PORTEGE M100 Maintenance Manual (960-452)