Toshiba Portege M100 Maintenance Manual - Page 92

2 Troubleshooting Procedures 2.13 Bluetooth Troubleshooting Procedure 2 Antennas' Connection Check The Bluetooth function wiring diagram is shown below: Any of the connections may be disconnected. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures, and perform the following checks: Check 1 Make sure the Bluetooth board is firmly connected to PJ3110 on the system board. If the connector is disconnected, connect it firmly and perform Procedure 1. If the Bluetooth board is still not functioning properly, perform Check 2. Check 2 Make sure the Bluetooth antenna cable (brown) is firmly connected to the Bluetooth board. If the Bluetooth antenna cable is disconnected, connect it firmly and perform Procedure 1. If the Bluetooth function is still not functioning properly, perform Check 3. Check 3 Make sure the connector PJ3290 on the Wireless communication switch board is firmly connected to connector PJ3270 on the system board. In any connections are disconnected, connect them firmly and perform Procedure 1. If the Bluetooth is still not functioning properly, go to Procedure 3. 2-50 PORTEGE M100 Maintenance Manual (960-452)