Toshiba Portege M100 Maintenance Manual - Page 177

3 Tests and Diagnostics 3.23 SETUP 11. Drives I/O This option displays the address and interrupt level for hard disk drive and CD/DVD-ROM drive. It is for information only and cannot be changed. Built-in HDD Select Bay This cannot be changed. This cannot be changed. 12. PCI Bus This item displays the interrupt level for the Card Bus in the computer and the PCI bus in the Desk Station. It is for information only and cannot be changed. PCI Bus This cannot be changed. 13. PC Card This option lets you set the PC Card Controller mode. When the "All Device" is selected in the "Device Config." of the "9.Configuration", this option can be changed. Auto-Selected If you are using an operating system which support Plug&Play, use this setting for all PC card. (Default) Card Bus/16 bit If the card does not work properly with the Auto-Selected setting, use this setting. PCIC Compatible If the card does not work properly with the Auto -Selected and CardBus/16 bit setting, use this setting. 14. Peripheral Use this option to select the peripheral's mode. (a) Pointing Devices This option enables or disables the Pointing Device. Enabled Disabled Enables the Pointing Device. (Default) Disables the Pointing Device. 3-68 PORTEGE M100 Maintenance Manual (960-452)