Toshiba Portege M100 Maintenance Manual - Page 149

3.19 Log Utilities 3 Tests and Diagnostics 3.19.2 Operations 1. Selecting 5 and pressing Enter in the DIAGNOSTIC MENU, logs error information into RAM or onto a floppy disk. The error information is displayed in the following format: XXXXX ERRORS CNT TS-NO PASS STS ADDR WD RD HSTS [ERROR STATUS NAME] 001 FDD 02 0000 103 00001 00 00 0000 FDD-WRITE PROTECTED 001 FDD 01 0000 180 00001 00 00 0000 FDD-TIME OUT ERROR Address Error status Pass count Subtest number Test name HDC status Read data Write data Error status name Error count [[1:Next,2:Prev,3:Exit,4:Clear,5:Print,6:FD Log Read,7:FD Log Write]] 2. The error information displayed on the screen can be manipulated by the following number keys: The 1 key scrolls the display to the next page. The 2 key scrolls the display to the previous page. The 3 key returns to the Diagnostic Menu. The 4 key erases all error log information in RAM. The 5 key outputs the error log information to a printer. The 6 key reads the log information from a floppy disk. The 7 key writes the log information to a floppy disk. 3. In the case of "error retry OK," a capital "R" will be placed at the beginning of the error status. However, it is not added to the error count. PORTEGE M100 Maintenance Manual (960-452) 3-41