Toshiba Portege M100 Maintenance Manual - Page 258
Installing the Sound/FIR Board, Sound/FIR Board, PJ6000, microphone, two M 2, screws
View all Toshiba Portege M100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 258 highlights
4.10 Sound/FIR Board 4 Replacement Procedures Installing the Sound/FIR Board To install the Sound/FIR Board, follow the steps below and refer to figures 4-24 and 4-25. 1. Connect the sound cable to PJ6000 on the sound/FIR board. 2. Fit the plastic cover onto the sound/FIR board. 3. Seat the sound/FIR board. 4. Seat the microphone in position. CAUTION: Be careful to route the cable so that the Top cover will not pinch it. Make a small loop on the board and set the microphone. 5. Secure the sound/FIR board with two M2×4 screws . PORTEGE M100 Maintenance Manual (960-452) 4-47
4.10 Sound/FIR Board
4
Replacement Procedures
PORTEGE M100 Maintenance Manual (960-452)
4-47
Installing the Sound/FIR Board
To install the
Sound/FIR Board
, follow the steps below and refer to figures 4-24 and 4-25.
1.
Connect the sound cable to
PJ6000
on the
sound/FIR board
.
2.
Fit the plastic cover onto the
sound/FIR board
.
3.
Seat the
sound/FIR board
.
4.
Seat the
microphone
in position.
CAUTION:
Be careful to route the cable so that the Top cover will not pinch it. Make a
small loop on the board and set the microphone.
5.
Secure the
sound/FIR board
with
two M 2
ยท
4 screws
.