Toshiba Portege M100 Maintenance Manual - Page 255
Installing the Bluetooth Board, 9 Bluetooth Board
View all Toshiba Portege M100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 255 highlights
4 Replacement Procedures 4.9 Bluetooth Board Figure 4-23 Removing the Bluetooth board 4. Disconnect the antenna coaxial cable from the Bluetooth board using a tool to disconnect an antenna coaxial cable. Installing the Bluetooth Board To install the Bluetooth board, make sure that the computer is in boot mode and powered off, follow the steps below and refer to figures 4-23. CAUTION: Be sure to switch the computer off before removing the Bluetooth board. Otherwise, the computer or the Bluetooth board may be damaged. 1. Connect the antenna coaxial cable to the connector on the Bluetooth board. CAUTION: Lay down the bluetooth antenna cable referring the following figure not to be pinched. 2. Connect the one side of bluetooth flexible flat cable to the Bluetooth board. 3. Fix the bluetooth board on the system board with two M2x3 silver flat head screws . 4. Connect the other side of bluetooth flexible flat cable to the connector PJ3110 on the system board. 4-44 PORTEGE M100 Maintenance Manual (960-452)