Toshiba Portege M100 Maintenance Manual - Page 256
Sound/FIR Board, Removing the Sound/FIR Board
View all Toshiba Portege M100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 256 highlights
4.10 Sound/FIR Board 4 Replacement Procedures 4.10 Sound/FIR Board Removing the Sound/FIR Board To remove the sound/FIR board, follow the steps below and refer to figures 4-24 and 4-25. 1. Remove two M2×4 screws securing the sound/FIR board. 2. Lift out the sound/FIR board with the internal microphone . Figure 4-24 Removing the sound/FIR board CAUTION: The sound/FIR board is connected to the system board by stacking connectors. When connecting or disconnecting a headphone or microphone to the jack on the sound/FIR board, be sure to do it after securing the sound/FIR board to the system board with screws. Otherwise the connector may be cracked. PORTEGE M100 Maintenance Manual (960-452) 4-45
4.10 Sound/FIR Board
4
Replacement Procedures
PORTEGE M100 Maintenance Manual (960-452)
4-45
4.10 Sound/FIR Board
Removing the Sound/FIR Board
To remove the
sound/FIR board
, follow the steps below and refer to figures 4-24 and 4-25.
1.
Remove
two M 2
ยท
4 screws
securing the
sound/FIR board
.
2.
Lift out the
sound/FIR board
with the
internal microphone
.
Figure 4-24
Removing the sound/FIR board
CAUTION:
The sound/FIR board is connected to the system board by stacking
connectors. When connecting or disconnecting a headphone or microphone
to the jack on the sound/FIR board, be sure to do it after securing the
sound/FIR board to the system board with screws. Otherwise the connector
may be cracked.