Toshiba Portege M100 Maintenance Manual - Page 280
Installing the I/O board, Modem/LAN cable, I/O board, five M2, screws
View all Toshiba Portege M100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 280 highlights
4 Replacement Procedures 4.17 I/O Board Installing the I/O board To install the I/O board, follow the steps below and refer to figures 4-40 and 4-41. 1. Connect the Modem/LAN cable to the I/O board and fix it with the glass tape. 2. Seat the I/O board. 3. Secure the I/O board with five M2×4 screws. CAUTION: Make sure you connect the boards securely. A loose connection could cause damage to the boards. Also, if the connectors are not fully seated the boards could be bent and damaged when you secure them with screws. 4-64 PORTEGE M100 Maintenance Manual (960-452)
4
Replacement Procedures
4.17
I/O Board
4-64
PORTEGE M100 Maintenance Manual (960-452)
Installing the I/O board
To install the I/O board, follow the steps below and refer to figures 4-40 and 4-41.
1.
Connect the
Modem/LAN cable
to the I/O board
and fix it
with the glass tape.
2.
Seat the
I/O board
.
3.
Secure
the
I/O board
with
five M2
ยท
4 screws
.
CAUTION
: Make sure you connect the boards securely. A loose connection could cause
damage to the boards. Also, if the connectors are not fully seated the boards
could be bent and damaged when you secure them with screws.