Toshiba Portege M100 Maintenance Manual - Page 229
Installing the HDD, connector, four M3, flat-head screws, HDD pack, cover, two M 2, silver screws
View all Toshiba Portege M100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 229 highlights
4 Replacement Procedures 4.2 HDD Installing the HDD To install the HDD, follow the steps below and refer to figures 4-4 to 4-7. CAUTION: Don't hold the HDD by its top and bottom flat surfaces. It may damage the HDD. 1. Connect the connector. 2. Seat the HDD bracket. 3. Secure four M3×4 flat-head screws. CAUTION: Do not apply pressure to the middle part of the HDD pack. It may damage the HDD bracket. Hold the HDD by its corners. 4. Hold the HDD pack by its corners, insert and press it into the computer, to fit the connector of the HDD pack into the connector of the computer. 5. Insert the white plastic tab into the gap between the computer top cover and HDD, and seat the cover. 6. Secure the HDD cover with two M2×4 silver screws . 4-18 PORTEGE M100 Maintenance Manual (960-452)