Toshiba Portege M100 Maintenance Manual - Page 271
System Board, Removing the System Board
View all Toshiba Portege M100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 271 highlights
4.15 System Board 4 Replacement Procedures 4.15 System Board Removing the System Board To remove the system board, follow the steps below and refer to figures 4-35 and 4-36. 1. Remove two M2× 4 screws securing the system board. 2. Remove the glass tape s securing the MDC cable and Modem/LAN cable. 3. Disconnect the MDC cable from the connector PJ3022 on the system board. 4. Disconnect the Modem/LAN cable from PJ3021 and PJ4101 on the system board. Figure 4-35 Removing the screws securing the system board PORTEGE M100 Maintenance Manual (960-452) 4-55
4.15
System Board
4
Replacement Procedures
PORTEGE M100 Maintenance Manual (960-452)
4-55
4.15 System Board
Removing the System Board
To remove the system board, follow the steps below and refer to figures 4-35 and 4-36.
1.
Remove
two M 2
ยท
4 screws
securing the
system board
.
2.
Remove the
glass tapes
securing the
MDC cable
and
Modem/LAN cable
.
3.
Disconnect the
MDC cable
from the connector
PJ3022
on the system board.
4.
Disconnect the
Modem/LAN cable
from
PJ3021
and
PJ4101
on the system board.
Figure 4-35
Removing the screws securing the system board