Toshiba Portege M100 Maintenance Manual - Page 52

2 Troubleshooting Procedures 2.3 Power Supply Troubleshooting Check 1 Compare the patterns in the hexadecimal error code to the tables below. q DC IN Error code Meaning 10h AC Adaptor output voltage is over 16.5 V. 11h Advanced Port Replicator output voltage is over 16.5 V. 12h Current from the DC power supply is over the limit (6.05 A). 13h Current from the DC power supply is over the limit (0.5 A), when there is no load. 14h Current sensing IC is not normal, when there is no load. q Main Battery Error code Meaning 21h Main battery charge current is over 6.05 A. 22h Main battery discharge current is over 0.5 A, when there is no load. 23h Main battery charge current is over 3.10 A, when the AC adapter is not directly connected. 24h Current sensing IC is not normal, when there is no load. 25h Main battery charge current is over 0.3 A. q 2nd Battery Error code Meaning 31h 2nd Battery charge current is over 6.05 A. 32h 2nd Battery discharge current is over 0.5 A, when there is no load. 33h 2nd Battery charge current is over 3.1 A, when the AC adapter is not directly connected. 34h Current sensing IC is not normal, when there is no load. 35h 2nd Battery charge current is over 0.3 A. q S3V output Error code Meaning 40h S3V voltage is 3.14 V or under, when the computer is powered on/off. 2-10 PORTEGE M100 Maintenance Manual (960-452)