Toshiba Portege M100 Maintenance Manual - Page 163
HDD Mode, Password, to confirm that you do not want to save your changes toward User.
View all Toshiba Portege M100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
3 Tests and Diagnostics 3.23 SETUP Moving Within the SETUP Menu and Changing Values 1. Press ß and à to move between the two columns. Press PgDn and PgUp to move between the two pages. Press ↑ and ↓ to move between items in a column. 2. Press either the space bar or BkSp to change the value. Accepting Changes and Exiting the SETUP Window 1. Press End to accept the changes you made. If the changed item does not require the system to reboot, the following message is displayed: Are you sure? (Y/N) If the changed item requires the system to reboot, the following message is displayed: Are you sure? (Y/N) The change you made will cause the system to reboot. 2. To make other changes, press N. Repeat the steps above. 3. To accept the changes, press Y. NOTE: You can press Esc to quit at any time without saving changes. SETUP asks you to confirm that you do not want to save your changes toward User. The Factory Preset Configuration When you access SETUP, the current configuration is displayed. 1. To show the factory preset configuration, press Home. 2. Press End and then press Y to accept the factory preset settings. NOTE: When you execute the default setting, the following settings are not changed: HDD Mode, Password 3-54 PORTEGE M100 Maintenance Manual (960-452)