Toshiba Portege M100 Maintenance Manual - Page 118

3.4 System Test 3 Tests and Diagnostics Subtest 10 Subtest 11 Subtest 12 Subtest 13 Temperature surveillance test Settings at the start of test • BIOS test mode (FAN -forced high speed, prohibition of SM interruptionetc.) • Prohibition of TCC throttling (Tj = 100C) • Turns off the LCD panel and FL inverter. • Set the charge prohibition mode Details of during the test • For the first One minute, CPU throttling is maximum. (87.5% throttle) • For fourteen minutes after that, CPU throttling is prohibited. (0% throttle) Method and time of Test Total for 15 minutes The test result (OK or NG) is judged from the gap between the temperature of the outside and temperature of the inside. The parameter of the temperature is different in each system, so use data informed by the system department. BT/W-LAN Switch test This subtest checks Bluetooth switch On/Off. The following messages appear. Blue-tooth Switch "ON", and press [Enter] key Blue-tooth Switch "OFF", and press [Enter] key Battery F/W test This subtest reads F/W data from the battery and compares it with correct constant data. The following message appears. * Get! Battery Data * Battery Type = XXXXXXXXXXXX Option Battery F/W test This subtest reads F/W data from the option battery and compares it with correct constant data. The following message appears. * Get! Battery Data * Battery Type = XXXXXXXXXXXX PORTEGE M100 Maintenance Manual (960-452) 3-11