ZyXEL MAX318M User Guide - Page 104
Static Route, 7.12 Static Route Add
View all ZyXEL MAX318M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Chapter 7 Network Setting Table 34 MAC Address Filter (continued) LABEL DESCRIPTION MAC Address Enter the MAC addresses of the wireless devices that are allowed or denied access to the WiMAX Device in these address fields. Enter the MAC addresses in a valid MAC address format, that is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc. Delete Click to delete a specific MAC address from the list. Add Click to add a MAC address to the list. OK Click this button when you are done adding a MAC Address. 7.11 Static Route Use these settings to create fixed paths through the network. Click Network Setting > Route > Static Route to open this screen as shown next. Figure 52 Static Route Screen This screen contains the following fields: Table 35 Static Route LABEL DESCRIPTION Destination This field displays the destination IP address of the static route. Subnet Mask This field displays the subnet mask of the static route. Next Hop This field displays next hop information of the static route. Metric This field displays the static route metric. Add Click this to add a new static route to the list. 7.12 Static Route Add Use these settings to configure a static route. 104 WiMAX Device Configuration User's Guide