ZyXEL MAX318M User Guide - Page 126

Chapter 8 Security This screen contains the following fields: Table 50 IP Filter LABEL Active Source IP DESCRIPTION Indicates whether the current IP filter is active or not. This displays the source IP address for the IP filter rule. Click Add to create a new, empty rule, then enter the incoming IP address for the WiMAX Device to block. Source Port If you want to delete this rule, click the Delete icon. This displays the source port number for the IP filter rule. Click Add to create a new, empty rule, then enter the incoming port number for the WiMAX Device to block. Destination IP If you want to delete this rule, click the Delete icon. This displays the destination IP address for the IP filter rule. Click Add to create a new, empty rule, then enter the outgoing IP address for the WiMAX Device to block. Destination Port If you want to delete this rule, click the Delete icon. This displays the destination port number for the IP filter rule. Click Add to create a new, empty rule, then enter the outgoing port number for the WiMAX Device to block. Protocol If you want to delete this rule, click the Delete icon. This displays the protocol blocked by the IP filter rule. Click Add to create a new, empty rule, then select the protocol type for the WiMAX Device to block. Delete Add OK If you want to delete this rule, click the Delete icon. Click this to delete a specified rule. Click this to add a new filter rule. Click this to save any changes made to the list. 8.3 MAC Filter Use this screen to allow ("whitelist") or block ("blacklist") connections to and from specific devices on the network based on their unique MAC addresses. Note: This feature only works when the WiMAX Device is in bridge mode. 126 WiMAX Device Configuration User's Guide