ZyXEL MAX318M User Guide - Page 81

Chapter 6 WiMAX Table 17 CAPL Settings: Add (continued) LABEL DESCRIPTION End Frequency (KHz) This indicates the end of the frequency band in kilohertz (KHz). Step (KHz) This indicates the frequency step within each band in kilohertz (KHz). Bandwidth (MHz) This indicates the bandwidth in megahertz (MHz). OK Click this button to save any changes made to the list. Save Click this to save the changes made. Cancel Click this avoid any changes made from being saved to your configuration. 6.7 RAPL Settings This screen allows you to specify the Roaming Agreement Preference List (RAPL) of preferred NSPs for establishing connections to the Home NSP. The RAPL is a list of NSPs that are affiliated with the Home NSP through roaming agreements. A NSP specified in the RAPL is a V-NSP and can route data to the Home NSP. Click WiMAX > ND&S > RAPL Settings to open this screen as shown next. Figure 34 RAPL Settings This screen contains the following fields: Table 18 RAPL Settings LABEL DESCRIPTION NSP ID Specify the Network Service Provider (NSP) ID in the format XX:XX:XX where X is a hexadecimal character. If the Home NSP ID is entered in this list, the WiMAX Device will try to use it to establish a connection. Priority Specify the priority for the NSP. Enter 1-250 where 1 is the highest priority. Delete Click this button to remove an item from the list. Add Click this button to add an item to the list. OK Click this button to save any changes made to the list. Save Click this to save the changes made. Cancel Click this avoid any changes made from being saved to your configuration. WiMAX Device Configuration User's Guide 81