ZyXEL MAX318M User Guide - Page 74
Authentication Settings
View all ZyXEL MAX318M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Chapter 6 WiMAX Table 13 Frequency Settings (continued) LABEL Bandwidth (MHz) DESCRIPTION This displays the bandwidth of the frequency band in megahertz (MHz). If you set a center frequency to 2600000 KHz with the bandwidth of 10 MHz, then the frequency band is from 2595000 to 2605000 KHz. Click the number to modify it. Enter the bandwidth of the frequency band in this field when you are adding an entry. Delete Click this button to remove an item from the list. Add Click this button to add an item to the list. OK Click this button to save any changes made to the list. A (When By Range is selected in the Setting Type field) Start Frequency (KHz) This indicates the beginning of a frequency band in kilohertz (KHz). Click this field to modify it. End Frequency (KHz) Step (KHz) Enter the beginning frequency when you are adding an entry. This indicates the end of the frequency band in kilohertz (KHz). Click this field to modify it. This indicates the frequency step within each band in kilohertz (KHz). Click this field to modify it. Bandwidth (MHz) This indicates the bandwidth in megahertz (MHz). Click this field to modify it. OK Click this button to save any changes made to the list. Valid Band Info (B) This table displays the entire frequency band the WiMAX Device supports. The frequenc(ies) to scan that you configured in table A must be within this range. Band Start (KHz) This indicates the beginning of the frequency band in kilohertz (KHz). Band End (KHz) This indicates the end of the frequency band in kilohertz (KHz). 6.4 Authentication Settings These settings allow the WiMAX Device to establish a secure (authenticated) connection with the service provider. 74 WiMAX Device Configuration User's Guide