ZyXEL MAX318M User Guide - Page 184

Chapter 12 Maintenance Click Maintenance > Remote MGMT > CWMP to open this screen as shown next. Figure 110 CWMP Screen This screen contains the following fields: Table 86 CWMP LABEL Enable ACS Server URL Bootstrap Enable ACS Username ACS Password Periodical Inform Enable Periodical Inform Interval Connection Request Username DESCRIPTION Select this to enable remote management using this service. Enter the URL or IP address of the auto-configuration server. Select this to enable bootstrap events. Enter the user name sent when the WiMAX Device connects to the ACS and which is used for authentication. You can enter up to 31 alphanumeric characters (a-z, A-Z, 0-9) and underscores but spaces are not allowed. Enter the password sent when the WiMAX Device connects to an ACS and which is used for authentication. You can enter up to 31 alphanumeric characters (a-z, A-Z, 0-9) and underscores but spaces are not allowed. Select this to allow the WiMAX Device to periodically connect to the ACS and check for configuration updates. If you do not enable this feature then the WiMAX Device can only be updated automatically when the ACS initiates contact with it and if you selected the checkbox on this screen. Enter the time interval (in seconds) at which the WiMAX Device connects to the auto-configuration server. Enter the connection request user name that the ACS must send to the WiMAX Device when it requests a connection. You can enter up to 31 alphanumeric characters (a-z, A-Z, 0-9) and underscores but spaces are not allowed. Note: This must be provided by the ACS administrator. 184 WiMAX Device Configuration User's Guide