ZyXEL MAX318M User Guide - Page 108
Port Forwarding Wizard, 7.15 Port Trigger
View all ZyXEL MAX318M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Chapter 7 Network Setting 7.14.1 Port Forwarding Wizard Use this wizard to set up a port forwarding rule for incoming service requests to the ports on your local network. Click Network Setting > NAT > Port Forwarding > Wizard to open this screen as shown next. Figure 56 Port Forwarding Wizard Screen This screen contains the following fields: Table 39 Port Forwarding Wizard LABEL DESCRIPTION Active Select this to make this port forwarding rule active. Port Forward Rule Select the type of port forwarding rule. Rule Name Enter a name for the port forwarding rule. Protocol Select the port forwarding protocol. Incoming Start Port Enter the starting port number for incoming traffic for the port forwarding rule. Incoming End Port Enter the ending port number for incoming traffic for the port forwarding rule. Forwarding Start Enter the starting port number for forwarded traffic for the port forwarding rule. Port Forwarding End Port Enter the ending port number for forwarded traffic for the port forwarding rule. Server IP Enter the port forwarding server IP address. 7.15 Port Trigger Use these settings to automate port forwarding and allow computers on local network to provide services that would normally require a fixed address on the local network. 108 WiMAX Device Configuration User's Guide