ZyXEL MAX318M User Guide - Page 73

Chapter 6 WiMAX Click WiMAX > Profile > Frequency Settings to open this screen as shown next. Figure 27 Frequency Settings Screen (By List) A B Figure 28 Frequency Settings Screen (By Range) A B This screen contains the following fields: Table 13 Frequency Settings LABEL DESCRIPTION Setting Type Select whether to scan base stations by entering specific frequency(-ies) (By List) or a range of frequencies (By Range). Note: When you select By Range, you can only configure one range of frequencies in this screen. To configure multiple frequency ranges, use the WiMAX > Wide Scan screen. Note: Some settings in this screen are only available depending on the Setting Type selected. Join Wide Scan Result The scanning result of the frequency to scan you configured in this screen will be shown in the WiMAX > Connect screen. Select this option to determine whether to also append the wide scanning result (configured in the WiMAX > Wide Scan screen) to the same table. Default Bandwidth Select the default bandwidth (size) per frequency band you specify in table A. A (When By List is selected in the Setting Type field) Frequency (KHz) This displays the center frequency of an frequency band in kilohertz (KHz). Click the number to modify it. Enter the center frequency in this field when you are adding an entry. WiMAX Device Configuration User's Guide 73