Brother International HL-3400CN Service Manual - Page 142

CHAPTER 5 CONTROL PANEL OPERATION Code No. 15 LCD Message MISPRINT 15 MISPRINT [*6] [*4] 16-1 ALIGN FU UNIT 16 ALIGN FU.UNIT [*4] 16-2 ALIGN FUSER CL ROLLER 16 ALIGN FUSER CL ROLLER [*4] 16-3 ALIGN TONER CG 16 ALIGN [*5] TONER CG [*4] Description of Message • The engine is idling. • The Ready LED is lit. [*61 The type of misprint error is indicated as follows; NOPQR: No PRREQ-N signal is available. PAPER: No paper is available in the feeder while executing the print operation after receipt of the print command. MEDIA: While executing the print process after receipt of print command, the media type of the feeder is not consistent with the specified media type. Misprint occurred during duplex printing. • This message can be cleared by pressing the Font button. • The engine is stopped. • The Ready LED is lit. • The fusing unit is not installed. Reconfirm the installation status of the fusing unit. • This message will be automatically cleared by opening & closing the paper exit cover. The message can also be cleared by pressing the Font button. • The engine is idling. • The Ready LED is lit. • The fuser cleaner is not installed. Reconfirm the installation status of the fuser cleaner. • This message will be automatically cleared by opening & closing the paper exit cover. The message can also be cleared by pressing the Font button. • The engine is ready to print. • The Ready LED is lit. [*51: The color of the incorrectly installed toner cartridge will be indicated as follows; Y: Yellow M: Magenta C: Cyan K: Black • Reinstall the toner cartridge correctly. • This message will be automatically cleared by opening & closing the front cover. 5-20