Brother International HL-3400CN Service Manual - Page 34

HL-3400CN SERVICE MANUAL 2. UNPACKING A. WARNING • The package containing a printer weighs approximately 66kg (145Ibs), so it is too heavy for one person to carry. it needs two adults or more to move the printer. Since the printer is a precision machine, make sure that it is carried slowly with care so that no impact occurs to the printer while moving it. • Do not attempt to lift a printer when it is covered by the polyethylene bag because it is slippery and may result in damage and injury if dropped. 2.1 Unpacking the Printer Refer to Fig.3-2 on the next page. 1) Cut the two bands from around the packing carton. 2) Remove the binding tape from the top of the package. 3) Open the top of the package and take the ST packing set out. 4) Remove the upper packing (4 locations). 5) Take the customisation kit** out of the box. 6) Take the power cable out of the box. (for US / Canada only). 7) Open up the polyethylene bag enclosing the printer and remove it. 8) Remove the silica gel. 9) Lift up and set up the printer in a suitable location using at least two persons. ** For USA/Canada, the kit contains the use's guide and printer driver disks. For other countries, the kit contains the use's guide, printer driver disks and the power cable. 3-5