Brother International HL-3400CN Service Manual - Page 151

HL-3400CN SERVICE MANUAL 36 CLEAR CARE Care Code counters displayed on the LCD can be cleared. Make sure that you clear the relevant CLEAR CARE mode whenever replacing periodical replacement parts with new ones. This mode should only be used to reset the counters after replacement of faulty consumables before their life expectancy is reached. For normal life replacement use the resets available in the Video controller mode Procedure Description of Procedures 1) Press the Continue button after selecting Screen (a) "CLEAR CARE" mode. (a) -> (b) LCD Message SERVICE MODE a) r, CLEAR CARE 2) Using the Set or 'V button, move the cursor to select the applicable CARE code and then press the Continue button. W (b) -> (c) 36 CLEAR CARE No.=123456789101216 3) When implementing CLEAR CARE, use the Set or V button to have the cursor meet YES, then press the Continue button. 0 (Refer to the table below.) (c) -> (d) CARED FC ROLL? > YES/NO 6) Press the Font button to exit the CLEAR CARE mode. (d) -> (e) d) 36 CLEAR CARE No.=123456789101216 SERVICE MODE e) .i , 1,. TEST PRINT NO. Periodical maintenance parts 2 Fuser cleaner 7 OPC belt cartridge 8 Fusing unit 9 Drum cleaner / Transfer roller 10 Transfer drum 13 Paper feeding roller 14 Paper feeding roller (for LFU1) 15 Paper feeding roller (for LFU2) 16 Paper discharger Code FC BC FU 120K / OW TD PK P1 P2 PD