Brother International HL-3400CN Service Manual - Page 42

HL-3400CN SERVICE MANUAL 3.4.2 Install the envelope adapter NOTE: The specification of envelopes feedable from the envelope adapter are as follows; • Capacity: 15 envelopes • Size: DL (110 x 220 mm), #10 (105 x 241 mm) (1) Prepare the media cassette and envelope adapter. (2) Put the adapter on the cassette base and engage the hooks provided on the leading edge of the adapter (left and right) into the cassette base. Envelope adapter Cassette base (3) Move the envelope guide to meet the adapter base. Fig. 3-19 Envelope guide Adaptor base (4) Move the paper guides to meet the desired envelope size. (5) Load the envelopes into the adapter. A CAUTION Do not load media in the adapter higher than the specified capacity limit, otherwise it may result in paper feed jams or print quality problems. Fig. 3-20 Paper guide Paper guide 7- Fig. 3-21 A CAUTION When removing the envelope adapter from the media cassette, pull the adapter toward you while holding the trailing edge of the adapter up approximately 10mm. Do not hold up the trailing edge of the adapter by force, otherwise it may result in damage to the hooks provided at the leading edge of the adapter. Envelope adaptor q!ZZZIZZLI Cassette base Hook Fig. 3-22 Cassette base 3-13