Brother International HL-3400CN Service Manual - Page 253
supporting
UPC - 012502526223
View all Brother International HL-3400CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 253 highlights
CHAPTER 7 DISASSEMBLY & RE-ASSEMBLY 4.6 4.6.1 Rear of the Printer Rear access cover ( ) / Transfer unit 3 (1) Open the rear access cover. (2) Remove the fixing screw BT4x10 (1 pc.) of the retaining strap supporting the transfer unit 3 to the printer body. (3) Take the transfer unit 3 out by holding the unit horizontally to remove the transfer unit 3. Retaining strap Transfer unit 3 0 Fig. 7-72 (4) Remove the set screws BT3x8 (4 pcs.) from the transfer unit 3. (5) Remove the transfer unit 3 from the rear access cover. Transfer unit 3 Rear access cover Fig. 7-73 NOTE: When reassembling the transfer unit, install the support shaft into the right hand hole first. 7-48
CHAPTER
7
DISASSEMBLY
&
RE
-ASSEMBLY
4.6
Rear
of
the
Printer
4.6.1
Rear
access
cover
(
)
/
Transfer
unit
3
(1)
Open
the
rear
access
cover.
(2)
Remove
the
fixing
screw
BT4x10
(1
pc.)
of
the
retaining
strap
supporting
the
transfer
unit
3
to
the
printer
body.
(3)
Take
the
transfer
unit
3
out
by
holding
the
unit
horizontally
to
remove
the
transfer
unit
3.
Retaining
strap
Transfer
unit
3
0
Fig.
7-72
(4)
Remove
the
set
screws
BT3x8
(4
pcs.)
from
the
transfer
unit
3.
(5)
Remove
the
transfer
unit
3
from
the
rear
access
cover.
Transfer
unit
3
Rear
access
cover
Fig.
7-73
NOTE:
When
reassembling
the
transfer
unit,
install
the
support
shaft
into
the
right
hand
hole
first.
7-48