Canon LBP 2460 Service Manual - Page 146
Rear cover, Delivery cover unit, Right rear cover
![]() |
View all Canon LBP 2460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
CHAPTER 3 4. Rear cover 1) Open the upper cover. 2) Open the pick-up unit door. 3) Remove the 2 screws, the claw, and the right rear cover. 5. Delivery cover unit 1) Open the delivery cover unit. 2) Remove the 2 rods holding the delivery cover unit to the printer. 3) Slightly lift the delivery cover unit, pull out the right side first, then the left. Screws Claw Right rear cover Figure 3-1-10 4) Remove the 6 screws and take off the rear cover. Rods Delivery cover unit Figure 3-1-12 Screws Rear cover Figure 3-1-11 3 - 4
![](/manual_guide/products/canon-lbp-2460-service-manual-2642b58/146.png)
4.
Rear cover
1)
Open the upper cover.
2)
Open the pick-up unit door.
3)
Remove the 2 screws, the claw, and the
right rear cover.
Screws
Claw
Right rear cover
Figure 3-1-10
4)
Remove the 6 screws and take off the
rear cover.
Screws
Rear cover
Figure 3-1-11
5.
Delivery cover unit
1)
Open the delivery cover unit.
2)
Remove the 2 rods holding the delivery
cover unit to the printer.
3)
Slightly lift the delivery cover unit, pull
out the right side first, then the left.
Rods
Delivery cover unit
Figure 3-1-12
CHAPTER 3
3 - 4