Canon LBP 2460 Service Manual - Page 186
Removal of the Separation Lower, Roller, Separation Upper Roller and, Torque Limiter,
View all Canon LBP 2460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 186 highlights
CHAPTER 3 7. Removal of the Separation Lower Roller, Separation Upper Roller and Torque Limiter 1) Follow steps 1 to 5 on page 3-40 to remove the pick-up motor. 2) Remove the drive unit. 3) Remove the 2 E-rings and 2 bushings, then take out the separation lower roller shaft. Remove the separation lower roller from the shaft. E-rings Bushings Separation lower roller Figure 3-8-17 4) Remove the separation lower shaft from the guide. Then take the separation upper roller and torque limiter off the shaft. Guide Separation upper roller Torque limiter Figure 3-8-18 3 - 44
7.
Removal of the Separation Lower
Roller, Separation Upper Roller and
Torque Limiter
1)
Follow steps 1 to 5 on page 3-40 to
remove the pick-up motor.
2)
Remove the drive unit.
3)
Remove the 2 E-rings and 2 bushings,
then take out the separation lower roller
shaft. Remove the separation lower
roller from the shaft.
E-rings
Bushings
Separation lower roller
Figure 3-8-17
4)
Remove the separation lower shaft from
the guide. Then take the separation
upper roller and torque limiter off the
shaft.
Guide
Separation upper roller
Torque limiter
Figure 3-8-18
CHAPTER 3
3 - 44