Canon LBP 2460 Service Manual - Page 210
Paper Deck Driver PCB, Removal from the main unit., Power Supply
View all Canon LBP 2460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 210 highlights
CHAPTER 3 G. Paper Deck Driver PCB 1. Removal from the main unit. 1) Remove the left cover. 2) Remove the rear cover. 3) Take out the 8 connectors. 4) After removing the 2 screws and the 2 PCB holding pins take out the paper deck driver PCB. H. Power Supply 1. Removal from the main unit. 1) Take off the rear cover. 2) Remove the connector and 2 screws, then take out the power supply by slightly lifting its left side. Connectors Screws Holding pins Paper deck driver PCB Figure 3-11-44 Connector Screws Power supply Figure 3-11-45 3 - 68
G.
Paper Deck Driver PCB
1.
Removal from the main unit.
1)
Remove the left cover.
2)
Remove the rear cover.
3)
Take out the 8 connectors.
4)
After removing the 2 screws and the 2
PCB holding pins take out the paper
deck driver PCB.
Connectors
Screws
Holding pins
Paper deck driver PCB
Figure 3-11-44
H.
Power Supply
1.
Removal from the main unit.
1)
Take off the rear cover.
2)
Remove the connector and 2 screws,
then take out the power supply by
slightly lifting its left side.
Connector
Screws
Power supply
Figure 3-11-45
CHAPTER 3
3 - 68