Canon LBP 2460 Service Manual - Page 185
Removal of the Drive Unit, Removal of the Envelope Feeder Pick, up Roller
View all Canon LBP 2460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
CHAPTER 3 5. Removal of the Drive Unit 1) Remove the pick-up motor following steps 1 to 5 on page 3-40. 2) Remove the screw. 6. Removal of the Envelope Feeder Pickup Roller 1) Follow steps 1 to 5 on page 3-40 and remove the pick-up motor. 2) Remove the drive unit. 3) Remove the 2 bushings and 2 screws, then take out the pick-up roller shaft. Screw Figure 3-8-14 3) Remove the drive unit by taking off the 2 E-ring and removing the 3 screws. Bushings Gear Pick-up roller Figure 3-8-16 4) Remove the 2 E-rings and 2 bushings, then take out the pick-up roller shaft. E-rings Drive unit Screws Figure 3-8-15 3 - 43
5.
Removal of the Drive Unit
1)
Remove the pick-up motor following
steps 1 to 5 on page 3-40.
2)
Remove the screw.
Screw
Figure 3-8-14
3)
Remove the drive unit by taking off the
2 E-ring and removing the 3 screws.
E-rings
Screws
Drive unit
Figure 3-8-15
6.
Removal of the Envelope Feeder Pick-
up Roller
1)
Follow steps 1 to 5 on page 3-40 and
remove the pick-up motor.
2)
Remove the drive unit.
3)
Remove the 2 bushings and 2 screws,
then take out the pick-up roller shaft.
Bushings
Gear
Pick-up roller
Figure 3-8-16
4)
Remove the 2 E-rings and 2 bushings,
then take out the pick-up roller shaft.
CHAPTER 3
3 - 43