Canon LBP 2460 Service Manual - Page 269
Incomplete Paper Feed, T-1 Multiple Paper Feed, Action, T-2 Wrinkles, T-3 Bent leading edge
View all Canon LBP 2460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 269 highlights
CHAPTER 4 B. Incomplete Paper Feed T-1 Multiple Paper Feed 1. The recommended paper is not being used. Action: Replace the paper. Advise the customer to use the recommended paper. 2. If this problem occurs with the multi-purpose tray, perform step 5 and subsequent steps. 3. The separation roller is worn or deformed. Action: Replace the separation roller. 4. The spring is defective. Action: Replace the spring that pulls the separation roller. 5. The separation pad surface is worn. Action: Replace the separation pad. 6. The spring is defective. Action: Replace the spring of the separation pad. T-2 Wrinkles 1. The recommended paper is not being used. Action: Replace the paper. Advise the customer to use the recommended paper. 2. The paper is damp. Action: Advise the customer on how to store paper to prevent it from dampening. 3. The separation roller is worn or deformed. Action: Open the upper cover before a sheet of paper enters the fixing unit. If there are wrinkles on the paper at this point or the paper is skewed, check the pick-up unit. 4. The fixing entrance guide is dirty. Action: Clean the guide. 5. The fixing lower roller is dirty. Action: Replace the fixing lower roller. 6. The fixing roller is deformed or worn. Action: Replace the worn or deformed roller. T-3 Bent leading edge 1. The recommended paper is not being used. The paper is curled or wrinkled. Action: Replace the paper. Advise the customer to use the recommended paper and on how to store paper. 4 - 55