Canon LBP 2460 Service Manual - Page 266
J-1 Pick-up unit, Action, J-2 Fixing and delivery unit, The print paper is bent.
View all Canon LBP 2460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 266 highlights
CHAPTER 4 J-1 Pick-up unit 1. The recommended paper is not being used or the paper is curled or wrinkled. Action: Replace the paper. Advise the customer to use recommended paper and on how to store paper. 2. If jams occur in the manual feed pick-up unit, perform step 6 and subsequent steps. 3. If jams occur in the cassette paper pick-up unit, perform step 9 and subsequent steps. 4. The registration clutch does not work properly. Action: Check using the steps of M-21 "Registration Roller not rotating (printer)". 5. The registration roller is worn, deformed, or dirty. Action: Clean the registration roller if it is dirty. Replace if worn or deformed. 6. Too much paper on the multi-purpose tray Action: Advise the customer not to over load the tray with paper. 7. The manual feeding pick-up roller is worn, deformed, or dirty. Action: Clean the manual feeding pick-up roller if it is dirty. Replace if worn or deformed. 8. The pick-up roller does not rotate when a print is being made. Action: Make a check using the steps of M-17 "No Paper Pick-up from Multi-purpose Tray". 9. The cassette is not positioned correctly. Action: Re-position the cassette properly. 10. The print paper is bent. Action: Replace the paper. 11. Too much paper in the cassette Action: Advise the customer not to are load the cassette with paper. 12. The cassette pick-up roller, separation roller, or feed roller is worn or deformed. Action: Replace if worn or deformed. Replace the separation roller and the feed roller together. 13. The cassette pick-up roller does not rotate when a print is being made. Action: Make a check using the steps of M-18 "No Paper Pick-up from Upper or Lower Cassette". J-2 Fixing and delivery unit 1. Paper longer than the paper length set by the user was loaded during manual feeding. Action: Advise the user to replace it with the set paper size. 2. The fixing roller does not rotate smoothly. 4 - 52