Canon LBP 2460 Service Manual - Page 156
Pick-up PCB, Disassembly/reassembly, Pick-up motor, Feed clutch
View all Canon LBP 2460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
CHAPTER 3 2. Disassembly/reassembly a. Pick-up motor 1) Undo the connector. 2) Remove the 2 screws, and slide the pick-up motor out in the direction of the arrow. b. Feed clutch 1) Disconnect the connector. 2) Remove the screw, and disconnect the 2 claws to remove the pick-up PCB. Connector Screws Pick-up motor Figure 3-3-4 Connector Claws Screws Pick-up PCB Figure 3-3-5 3) Undo the claw and remove the clutch fixing plate. 4) Remove the E-ring, and then the feed clutch. 3 - 14 Claw E-ring Clutch fixing plate Feed clutch Figure 3-3-6
2.
Disassembly/reassembly
a.
Pick-up motor
1)
Undo the connector.
2)
Remove the 2 screws, and slide the
pick-up motor out in the direction of the
arrow.
Connector
Screws
Pick-up motor
Figure 3-3-4
b.
Feed clutch
1)
Disconnect the connector.
2)
Remove the screw, and disconnect the 2
claws to remove the pick-up PCB.
Connector
Screws
Claws
Pick-up PCB
Figure 3-3-5
3)
Undo the claw and remove the clutch
fixing plate.
4)
Remove the E-ring, and then the feed
clutch.
Claw
Clutch fixing plate
E-ring
Feed clutch
Figure 3-3-6
CHAPTER 3
3 - 14