Canon LBP 2460 Service Manual - Page 152
II. DRIVE SYSTEM, Drive Unit, Removal from the printer
![]() |
View all Canon LBP 2460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
CHAPTER 3 II. DRIVE SYSTEM A. Drive Unit 1. Removal from the printer 1) Remove the pick-up unit following steps 1-7 on Page 3-12. 2) Remove the screw, and then the cassette stay. Screw Cassette stay Figure 3-2-1 3) Disconnect the claw, and then the clutch cover. 6) Remove the 2 screws and the drive unit. Screws Drive unit Figure 3-2-3 Claw Clutch cover Figure 3-2-2 4) Remove the high-voltage power supply unit following steps 1-2 on Page 3-36. 5) Undo the connector, remove the 4 screws and then the main motor. 3 - 10
![](/manual_guide/products/canon-lbp-2460-service-manual-2642b58/152.png)
II. DRIVE SYSTEM
A.
Drive Unit
1.
Removal from the printer
1)
Remove the pick-up unit following steps
1-7 on Page 3-12.
2)
Remove the screw, and then the cassette
stay.
Screw
Cassette stay
Figure 3-2-1
3)
Disconnect the claw, and then the clutch
cover.
Claw
Clutch cover
Figure 3-2-2
4)
Remove the high-voltage power supply
unit following steps 1-2 on Page 3-36.
5)
Undo the connector, remove the 4
screws and then the main motor.
6)
Remove the 2 screws and the drive unit.
Screws
Drive unit
Figure 3-2-3
CHAPTER 3
3 - 10