Canon LBP 2460 Service Manual - Page 243

CHAPTER 4 A. Messages Table Message Meaning Action + FORMAT DISK/ Either a request has been made to format the Press + to format the disk or - IGNORE DISK disk or the printer has determined that the press - to ignore the disk. disk needs formatting(Engin a new For new/unformatted disk: If unformatted disk is installed when power press-to ignore disk, the printer up). goes to "READY". Any attempt to write to the disk will be flushed since the disk has not + REALLY been formatted FORMAT the operator is being asked to verify the disk Press + to verify that the disk is - IGNORE DISK formatting is really wanted. This is in to be formatted or press - to skip response to the foregoing message. formatting the disk. This message will not display for new/unformatted disk(eg. The disk is to be formatted for the 1st time) START DISK TEST Start testing the hard disk Press ENTER to start disk testing. NOTE: this operation will cause the disk to format when press enter to end test. If the printer is powered off during the disk test, the message + FORMAT DISK - IGNORE DISK will appear when the printer is powered on ENTER ENDS Stop testing the hard disk Press ENTER to end disk TEST testing. NOTE: The disk will be formatted and the printer will reboot automatically when press ENTER to end disk test DISK ALMOST Warning message when the Disk is 70+% Delete pcl/ps fonts/macros/files FULL full. or format the disk to clear the message. The message doesn't clear with power cycle or COLD RESET. This message has lower priority than printer error messages such as "toner low" or "memory overflow" DISK FULL Disk is 95% full. The printer goes offline Delete pcl/ps fonts/macros/files (also at power up with a "disk full" or format the disk to clear the installed). If AUTO CONT is ON, the printer message. The message doesn't will resume back online after 10 seconds. If clear with power cycle or COLD continue to send files to the disk that larger RESET. This message has lower than the 5% left on the disk, the files will be priority than printer error flushed or printed out as text. messages such as "toner low" or "memory overflow" READY Mopier is activated. ### is the total mopier No action required. This #OF### count. # is the increment count up to ###. message is temporarily 4 - 29