Canon LBP 2460 Service Manual - Page 197
Limit Switch,
View all Canon LBP 2460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
CHAPTER 3 2. Disassembly/ assembly a. Lifter clutch 1) Remove the screw. 2) Remove the clutch cover and bushing, then take out the lifter clutch. Screw Bushing Clutch cover Lifter clutch Figure 3-11-7 b. Deck motor 1. Removal from the main unit 1) Remove the 4 screws, and take out the deck motor. C. Limit Switch 1. Removal from the main unit. 1) Remove the 2 screws, then take off the upper cover. Screws Upper cover Figure 3-11-9 2) Pull out the tray. 3) Remove the rear cover. 4) Remove the connector. 5) Take out the screw and slide the stay in direction of the arrow to remove. Screws Deck motor Figure 3-11-8 Connector Stay Screw Figure 3-11-10 3 - 55
2.
Disassembly/ assembly
a.
Lifter clutch
1)
Remove the screw.
2)
Remove the clutch cover and bushing,
then take out the lifter clutch.
Screw
Clutch cover
Bushing
Lifter clutch
Figure 3-11-7
b.
Deck motor
1.
Removal from the main unit
1)
Remove the 4 screws, and take out the
deck motor.
Screws
Deck motor
Figure 3-11-8
C.
Limit Switch
1.
Removal from the main unit.
1)
Remove the 2 screws, then take off the
upper cover.
Screws
Upper cover
Figure 3-11-9
2)
Pull out the tray.
3)
Remove the rear cover.
4)
Remove the connector.
5)
Take out the screw and slide the stay in
direction of the arrow to remove.
Connector
Screw
Stay
Figure 3-11-10
CHAPTER 3
3 - 55