Dell Broadcom NetXtreme Family of Adapters Broadcom NetXtreme 57XX User Guide - Page 178
SNMP Agent
View all Dell Broadcom NetXtreme Family of Adapters manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
Use names such as BASP1 for TEAM 1, BASP2 for TEAM 2, BASP3 for TEAM 3 and BASP4 for TEAM 4. When you modify a team, you may need to reboot after reinitialization for the changes to take effect. Repeat steps 22 through 27 to configure an additional physical driver and to configure additional frame types. The configuration can be viewed in the View Configuration - All INETCFG Commands console. SNMP Agent This SNMP agent is designed to support the configuration information pertaining to the Broadcom BASP driver for NetWare. Installation When the BASP.LDI driver is installed using nwconfig or nwinstall, the driver automatically copies the BASP.LAN, bmapi.nlm, and bsnmp.nlm files to the system. After you configure and run the BASP and bind the BASP to network adapters, load the Broadcom SNMP Instrumentation Agent (BSNMP) as follows: From the NetWare Server console command line interface, type: load bmapi.nlm load bsnmp.nlm SNMP Objects BASP SNMP objects are provided in the BASP-Config.MIB file, which is on your driver source media. The snmpget and snmpgetnext commands can be used to receive the BASP SNMP objects such as: snmpget localhost public BASP-Config-MIB::btTeamNumber snmpgetnext localhost public BASP-Config-MIB::btTeamNumber NOTE: Only BASP configuration information is available through SNMP in NetWare. Statistical events are only available for the base adapters Files BASP.LAN bmapi.nlm bsnmp.nlm BASP-CONFIG.MIB Please read all Restrictions and Disclaimers. Back to Contents Page