Dell PowerConnect M6220 User's Guide - Page 135
Out of Band Interface, System, IP Addressing, Protocol, Network Mask, Default Gateway
View all Dell PowerConnect M6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Out of Band Interface Use the Out of Band Interface menu page to assign the Out of Band Interface IP address, the Subnet Mask, the Default Gateway IP address, and to assign the boot protocol. To display the Out of Band Interface page, click System > IP Addressing > Out of Band Interface in the tree view. Figure 6-24. Out of Band Interface The Out of Band Interface page contains the following fields: • Protocol - Use the drop-down menu to select None, Bootp, or DCHP. • IP Address - Displays the Out of Band Interface IP address. • Network Mask - The subnet mask of the source IP address. Note: Each part of the IP address must start with a number other than zero. For example, IP addresses 001.100.192.6 and 192.001.10.3 are not valid. • Default Gateway - Sets the default gateway IP address. • Burned in MAC Address - Displays the Burned in MAC Address of the Out of Band Interface. Modifying Out of Band Interface IP Address Parameters 1. Open the Out of Band Interface page. 2. Modify the IP address in the IP Address field. 3. Modify other fields as needed. 4. Click Apply Changes. The parameters are modified, and the device is updated. Configuring System Information 133