Dell PowerConnect M6220 User's Guide - Page 286
Assign ACL Priority, ACL Bind Configuration, Interface, Select an ACL, Apply Changes, Show All, Remove
View all Dell PowerConnect M6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 286 highlights
- Assign ACL Priority - Assigns the priority of this ACL. If more than one ACL is applied to an interface, then the match criteria for the highest priority ACLs are checked first. Assigning an ACL to an Interface 1. Open the ACL Bind Configuration page. 2. In the Interface field, specify the Unit and Port, LAG, or VLAN to configure. 3. Select the IP, IPv6, or MAC ACL in the Select an ACL field. Note: Whenever an ACL is assigned on a port, LAG, or VLAN, flows from that ingress interface that do not match the ACL are matched to the default rule, which is Drop unmatched packets. 4. Specify the priority in Assign ACL Priority. 5. Click Apply Changes. The ACL is attached to the specified interface(s). Removing an Interface from an ACL 1. Open the ACL Bind Configuration page. 2. Click Show All. 3. In the Interface field, specify the Unit and Port, LAG, or VLAN to view the ACL bindings for that interface. 4. Select the Remove check box for one or more ACLs to remove. 5. Click Apply Changes. The specified ACL(s) are removed from the interface. Assigning ACL Membership Using the CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • ACL Commands 284 Configuring Switching Information