Dell PowerConnect M6220 User's Guide - Page 332
VLAN Port Settings, Switching > VLAN > Port Settings
View all Dell PowerConnect M6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 332 highlights
Copying Double VLAN Parameters 1. Open the Double VLAN Interface Configuration page. 2. Click Show All. The Double VLAN Port Parameters Table displays. 3. Specify the Port you are copying from in Copy Parameters From. 4. Click Copy To for each Interface to receive these parameters. 5. Click Apply Changes. The Double VLAN port settings are copied, and the device is updated. Modifying Settings for Multiple Ports 1. Open the Double VLAN Interface Configuration page. 2. Click Show All. The Double VLAN Port Parameters Table displays. 3. Click Edit for each Port to modify. 4. Edit fields as needed. 5. Click Apply Changes. The Double VLAN port settings are modified, and the device is updated. Configuring Double VLAN Tagging Using CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • VLAN Commands VLAN Port Settings In a port-based VLAN, untagged traffic is bridged through specified ports based on the receiving ports PVID. Port-based VLANs can help optimize network traffic patterns because broadcast, multicast, and unknown unicast packets are sent only to ports that are members of the VLAN. Packets that are received with a VLAN tag uses that VLAN ID for the switching process. Use the VLAN Port Settings page to identify a port as part of a VLAN, as well as to define and modify VLAN port parameters. To display the VLAN Port Settings page, click Switching > VLAN > Port Settings in the tree view. 330 Configuring Switching Information