Dell PowerConnect M6220 User's Guide - Page 219
Authentication KeyMD5-16; SHA-20 HEX character pairs, SNMPv3 User Security Model
View all Dell PowerConnect M6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 219 highlights
• Privacy - Specifies whether or not the authentication key is to be used. Choose one of the following values: - None - Do not use an authentication key. - des - Use a CBC-DES Symmetric Encryption Password for the authentication key. - des-key - Use an HMAC-MD5-96 Authentication Pre-generated key. • Authentication Key(MD5-16; SHA-20 HEX character pairs) - Specify the authentication key. An authentication key is defined only if the authentication method is MD5 or SHA. • Remove - Removes the specified user from the specified group when checked. Adding SNMPv3 Local Users to a Group 1. Open the SNMPv3 User Security Model page. 2. Click Add Local User. The Add Local User page displays: Figure 6-97. Add Local User 3. Define the relevant fields. 4. Click Apply Changes. 5. The user is added to the group, and the device is updated. Adding SNMPv3 Remote Users to a Group 1. Open the SNMPv3 User Security Model page. 2. Click Add Remote User. The Add Remote User page displays: Configuring System Information 217