Dell PowerConnect M6220 User's Guide - Page 704
IPv4 Multicast > PIM > Global Configuration, IPv6 Multicast > PIM >
View all Dell PowerConnect M6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 704 highlights
PIM-DM Global Configuration Use the PIM-DM Global Configuration page to configure the administrative status of PIM-DM or PIM-SM on the switch. To display the page, click IPv4 Multicast > PIM > Global Configuration or IPv6 Multicast > PIM > Global Configuration in the navigation tree. Figure 12-34. PIM Global Configuration The PIM Global Configuration page contains the following fields: • PIM Protocol - Select PIM-DM or PIM-SM. Only one PIM protocol can be enabled on the switch at a time. If you select PIM-SM, additional fields appear. • Admin Mode - Select Enable or Disable from the drop-down menu to set the administrative status of PIM on the system. The default is Disable. • Data Threshold Rate - If PIM-SM is selected as the protocol, enter the minimum source data rate in K bits/second above which the last-hop router switches to a source-specific shortest path tree. The valid values are from 0 to 2000 K bits/sec. The default value is 0. This field is not available for PIMDM. Register Threshold Rate - If PIM-SM is selected as the protocol, enter the minimum source data rate in K bits/second above which the Rendezvous Point router switches to a source-specific shortest path tree. The valid values are from 0 to 2000 K bits/sec. The default value is 0. This field is not available for PIM-DM. Configuring PIM-DM 1. Open the PIM-DM Global Configuration page. 2. Set Admin Mode to Enable or Disable, to turn PIM-DM on or off. 3. Click Apply Changes. The PIM-DM configuration is saved, and the device is updated. 702 Configuring IP Multicast