Dell PowerConnect M6220 User's Guide - Page 469
Area Configuration, Routing > OSPF > Area Configuration
View all Dell PowerConnect M6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 469 highlights
Default Route Advertise • Default Information Originate - Enable or Disable Default Route Advertise. • Always - Sets the router advertise 0.0.0.0/0.0.0.0 when set to True. • Metric - Specifies the metric of the default route. The valid values are 1 to 16777214. Enter 0 to unconfigure. • Metric Type - Sets the metric type of the default route. Options are External Type 1 and External Type 2. External Type 2 is the default. Modifying an OSPF Configuration 1. Open the OSPF Configuration page. 2. Change values as needed. 3. Click Apply Changes. Changes are saved, and the OSPF Interface is updated. OSPF Configuration CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • OSPF Commands Area Configuration The OSPF Area Configuration page lets you create a Stub area configuration and NSSA once you've enabled OSPF on an interface through Routing > OSPF > Interface Configuration. At least one router must have OSPF enabled for this web page to display. To display the page, click Routing > OSPF > Area Configuration in the tree view. If a Stub Area has been created, the fields in the Stub Area Information are available. If a NSSA has been created, the fields in the NSSA Area Information are available. Configuring Routing 467