Dell PowerConnect M6220 User's Guide - Page 705

Configuring PIM-DM using the CLI Command For information about the CLI command that performs this function, see the following chapter in the CLI Reference Guide: • PIM-DM Commands PIM-DM Global Status Use the PIM-DM Global Status page to view the administrative status of PIM-DM or PIM-SM on the switch. To display the page, click IPv4 Multicast > PIM-DM > Global Status or IPv6 Multicast > PIM > Global Status in the tree view. Figure 12-35. PIM Global Status The PIM Global Status page contains the following fields: • PIM Protocol - Select PIM-DM or PIM-SM. Only one PIM protocol can be enabled on the switch at a time. If you select PIM-SM, additional fields appear. • Admin Mode - Displays the administrative status of the selected PIM protocol on the system. • Data Threshold Rate - If PIM-SM is selected as the protocol, shows the minimum source data rate in Kbps above which the last-hop router switches to a source-specific shortest path tree. • Register Threshold Rate - If PIM-SM is selected as the protocol, shows the minimum source data rate in Kbps above which the Rendezvous Point router switches to a source-specific shortest path tree. Viewing Global PIM Settings using the CLI Command For information about the CLI command that performs this function, see the following chapter in the CLI Reference Guide: • PIM-DM or PIM-SM Commands Configuring IP Multicast 703