Dell PowerConnect M6220 User's Guide - Page 269
IP ACL Configuration, Port Security, Show All., Port Security Table, Apply Changes
View all Dell PowerConnect M6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 269 highlights
Viewing the Port Security Table 1. Open the Port Security page. 2. Click Show All. The Port Security Table displays. Figure 7-5. Port Security Table 3. Use the Unit drop-down menu to view the Port Security Table for other units in the stack, if they exist. Defining Multiple Locked Ports 1. Open the Port Security page. 2. Click Show All. The Port Security Table displays. 3. Click Edit for each port whose parameters are to be changed. 4. Fields can now be edited as needed for these ports. 5. Click Apply Changes. The changes are made to the Port Security table, and the device is updated. Configuring Port Security with CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • Address Table Commands IP ACL Configuration Access control lists (ACL) allow network managers to define classification actions and rules for specific ingress ports. Your switch supports up to 100 ACLs. However, the hardware resources are limited and may not be able to fully support 100 completely populated ACLs. Configuring Switching Information 267