Dell PowerConnect M6220 User's Guide - Page 294

Figure 7-24. Add Protected Port 3. Use the drop-down menu to assign the numeric designation 0, 1, or 2 to the Protected Group ID. 4. Enter a Protected Group Name (1-32 characters). 5. Click Apply Changes. The Protected Group settings are copied, and the device is updated. Configuring Protected Ports With CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • Switchport Protected Commands LAG Configuration Link Aggregation allows one or more full duplex Ethernet links to be aggregated together to form a Link Aggregation Group (LAG). The switch can treat LAG as if it were a single link. To display the LAG Configuration page, click Switching > Ports > LAG Configuration in the tree view. Figure 7-25. LAG Configuration The LAG Configuration page contains the following fields: 292 Configuring Switching Information