Dell PowerConnect M6220 User's Guide - Page 336
Admit Tag Only, Admit All, Ingress Filtering, VLAN LAG Settings, Apply Changes, Show All
View all Dell PowerConnect M6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 336 highlights
- Admit Tag Only - The LAG only accepts tagged packets. - Admit All - Tagged and untagged packets are both accepted by the LAG. • Ingress Filtering - Enables or disables Ingress filtering by the LAG. Ingress filtering discards packets where the VLAN tag does not match the LAG VLAN membership. Assigning VLAN LAG Settings 1. Open the VLAN LAG Settings page. 2. Select a LAG from the LAG drop-down menu 3. Complete the remaining fields on the page. 4. Click Apply Changes. The VLAN LAG parameters are defined, and the device is updated. Displaying the VLAN LAG Table 1. Open the VLAN LAG Settings page. 2. Click Show All. The VLAN LAG Table displays. Figure 7-57. VLAN LAG Table 334 Configuring Switching Information
334
Configuring Switching Information
–
Admit Tag Only
— The LAG only accepts tagged packets.
–
Admit All
— Tagged and untagged packets are both accepted by the LAG.
•
Ingress Filtering
— Enables or disables Ingress filtering by the LAG. Ingress filtering discards packets
where the VLAN tag does not match the LAG VLAN membership.
Assigning VLAN LAG Settings
1.
Open the
VLAN LAG Settings
page.
2.
Select a LAG from the
LAG
drop-down menu
3.
Complete the remaining fields on the page.
4.
Click
Apply Changes
.
The VLAN LAG parameters are defined, and the device is updated.
Displaying the VLAN LAG Table
1.
Open the
VLAN LAG Settings
page.
2.
Click
Show All
.
The
VLAN LAG Table
displays.
Figure 7-57.
VLAN LAG Table