Dell PowerConnect M6220 User's Guide - Page 333
VLAN Port Settings, Ports, Port VLAN Mode, General, Access, Trunk, PVID 1-4093 | 4095, Frame Type
View all Dell PowerConnect M6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 333 highlights
Figure 7-54. VLAN Port Settings The VLAN Port Settings page contains the following fields: • Ports - Specifies the Unit and Port included in the VLAN. • Port VLAN Mode - Indicates the port mode. Possible values are: - General - The port belongs to VLANs, and each VLAN is user-defined as tagged or untagged (full 802.1Q mode). - Access - The port belongs to a single untagged VLAN. When a port is in Access mode, the packet types which are accepted on the port (packet type) cannot be designated. It is also not possible to enable/disable ingress filtering on an access port. - Trunk - The port belongs to more than one VLAN, and all ports are tagged (except for an optional single native VLAN). • PVID (1-4093) | 4095 - Assigns a VLAN ID to untagged packets. Possible values are 1-4093 or 4095. • Frame Type - Specifies frame type accepted on the port. Default is Admit All. Possible values are: - Admit Tag Only-Indicates that only tagged frames are accepted on the port. - Admit All-Indicates that both tagged and untagged frames are accepted on the port. • Ingress Filtering - Enables or disables Ingress filtering on the port. Ingress filtering discards frames where the VLAN tag does not match the port VLAN membership. Configuring Switching Information 331