Dell PowerConnect M6220 User's Guide - Page 290
Transceiver Firmware Version, Current Flow Control - firmware update
View all Dell PowerConnect M6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 290 highlights
- Full - Indicates that the interface supports transmission between the switch and the client in both directions simultaneously. • Current Duplex Mode - Displays the synchronized port duplex mode. • Auto Negotiation - Enables Auto Negotiation on the port. Auto Negotiation is a protocol between two link partners that enables a port to advertise its transmission rate, duplex mode, and flow control abilities to its partner. • Current Auto Negotiation - Displays the current Auto Negotiation setting. • Admin Advertisement - Specifies the capabilities advertised by the port. The field values include: • LAG - Displays LAG number if this port is a member of a LAG. • Current Flow Control - Indicates the current Flow Control settings. Possible field values are: - Active - Flow Control is active. - Inactive - Flow Control is inactive. • Transceiver Firmware Version - Displays firmware part number of port transceiver, if available. Valid only for SFX7101 transceivers on 10GBase-T non-stacking ports. • Image Firmware Version - Displays the version of the image on the firmware. • Firmware Update Status - Indicates the statue of the firmware on the switch: - Up-to-date - The firmware status is current. - Outdated - The firmware status is not current. • Max. Cable Length- Displays the maximum cable length determined by current power backoff level. 288 Configuring Switching Information