Dell PowerConnect M6220 User's Guide - Page 198

Configuring Users in a Remote RADIUS Server You can use a remote RADIUS server client authorization. You must add all users to the RADIUS server. The local database does not share any information with the remote RADIUS database. The following table indicates the RADIUS attributes you use to configure authorized captive portal clients. The table indicates both RADIUS attributes and vendor-specific attributes (VSA). VSAs are denoted in the Attribute column and are comma delimited (vendor id, attribute id). Table 6-1. Captive Portal User RADIUS Attributes Attribute Number User-Name 1 User-Password 2 Session-Timeout 27 Idle-Timeout 28 Description Range Usage User name to be authorized 1-32 characters Required User password 8-64 characters Required Logout once session timeout Integer (seconds) Optional is reached (seconds). If the attribute is 0 or not present then use the value configured for the captive portal. Logout once idle timeout is Integer (seconds) Optional reached (seconds). If the attribute is 0 or not present then use the value configured for the captive portal. Default None None 0 0 User Group You can assign Local Users to User Groups that you create. If the Verification Mode is Local or RADIUS, you assign a User Group to a CP Configuration. All users who belong to the group are permitted to access the network through this portal. The User Group list is the same for all CP configurations on the switch. To view and configure User Groups, click System > Captive Portal > User Group. 196 Configuring System Information